Gypsum putty

Arkan Morter

For foundation and surface decoration

Product Specifications

• Arkan Morter is a thick smoothing plaster for rough surface ready for manual application after the addition of the specific amount of water it gives a homogeneous mortar ready for application without adding any additives.

• Arkan Morter is gypsum powder and high quality additives enhancing the product performance.

• Arkan Morter has the ability to act as a first thick smoothing coat for rough traditional sand & cement plaster to repair it in order to reach the required lining.

• Arkan Morter is rich with adhesion additives improving its adhesion to different substrates.

• Arkan Morter is Easy to prepare, only spray the powder to the indicated ratio of water then mix thoroughly till reaching the required consistency.

• It has average coverage rate around 900 m2/ Ton at a 1 mm thickness, according to type and roughness of substrates.

• Adjusted setting time ranging 60-70 mins according to application and storage conditions.

Usage

• Perfect as a thick smoothing coat for the rough surface.

• Perfect to repair traditional plastering method especially for very rough surfaces.

• It doesn’t show the jointing between different areas applied on a long interval of time
making it perfect for repairs and maintenance.

Technical Specification

Mix density	1550-1600 Kg/m3
Average coverage rate	3.2 -4 m2/Kg per coat
Maximum thickness	5 mm per layer
Average compressive strength	1.5 Newton/mm2
Average tensile strength	2 Newton/mm2
Average surface Hardness	10 Newton/mm2
Working time	100 mins
Setting time	120 mins
PH	7-8
Mixing ratio	60% (± 5%)
Sack weight	12 & 25 Kg

Our Products

Depends On Its Manufacturing Plaster Of Paris On The Highest Quality Of Raw Materials Extracted From Sinai Which Characterised By The Gypsum Ore With The Highest Purity Which Exceed 95% And The Homogeneous Brightness White