Gypsum putty

Arkan Finish 120

For foundation and surface decoration

Product Specifications

• Arkan Finish 120 is ready-mixed whitish gypsum Powder with very fine particles not exceeding 60 micron and top quality additives enhancing the product performance by adding the right portion of clean water it gives homogeneous putty ready for application without any further additives.

• Arkan Finish 120 has the ability to smooth wall and ceiling plastered surfaces, preparing the surface for the painting phase and it is a perfect solution for fair-face.

• Arkan Finish 120 Can reach a thickness up to 5 mm per layer and ability to apply more than one coat per day without cracking according to surface needs.

• Arkan Finish 120 hides separations, jointing especially in repairs and large areas.

• Arkan Finish 120 has a high adhesion strength to surfaces.

• Arkan Finish 120 has average coverage rate reaching 3-4 m2 per Kg of powder, according to surface conditions and required thickness

Usage

• Perfect as a first thick smoothing layer on top of traditional plaster

• Optimum for un-leveled or old traditional plaster and for small surface repairs.

• On gypsum board to fill the gaps

Technical Specification

Mix density	1550-1600 Kg/m3
Average coverage rate	3-4 m2/Kg per coat
Maximum thickness	5 mm per layer
Average compressive strength	1.5 Newton/mm2
Average tensile strength	2 Newton/mm2
Average surface Hardness	10 Newton/mm2
Working time	100 mins
Setting time	120 mins
PH	7-8
Mixing ratio	60% (± 5%)
Sack weight	12 & 25 Kg

Our Products

Depends On Its Manufacturing Plaster Of Paris On The Highest Quality Of Raw Materials Extracted From Sinai Which Characterised By The Gypsum Ore With The Highest Purity Which Exceed 95% And The Homogeneous Brightness White